Available straight or with a 1-3/4″ offset. 4.5:1 ratio, 3/8″ thick. Welded pedals include the pivot tube welded in place and two Delrin bushings. Brake pedals are offset to the...
Search for pedals - 8 results found
Dear Welder Series… Brake/Clutch for ’36 Ford?
...Todd, we can sub manual pedals for the power booster pedals and add another plunger and rod end. We don’t sell master cylinders. This is described in our catalog on...
Dear Welder Series… Brake/ Clutch Pedal Kit?
...brake pedal with no offset so the pedals can be offset symmetrically to clear the steering column. This reduces the price slightly. I hope this helps. Please write again if...
Brake Booster/ Master Cylinder Mount Kits
...or Ford manual master cylinder if the booster is not being used. (In this case one of the 5.75:1 pedals should be used.) The pedal is offset for right foot...
Pedal Pad Mounting Kit
...mount makes it easy to install pedal pads on brake and clutch arms – simply drill two holes in the pedal arm. Mounts on under-floor pedals or swing pedals. Positive...
Dear Welder Series… Brake/ Clutch question
...cylinder. Holes could be drilled for the Wilwood clutch master. The pedals can be traded out for the 21890 straight up brake pedal arms. It would cost a little over...
Brake Pedal/ Master Cylinder Bracket Kit
...you’re looking for a compact brake/ clutch pedal kit, it’s easy to add a second pedal to this bracket. If you choose this option, both pedals are supplied unbent. Clutch...
Pedal Bracket with Under Seat Booster/Master Cylinder Mount Kit
...formed bracket for the pedal mount and both the brake and clutch pedals are supplied with no offset. In the welded kit, the brake/clutch pedal bracket is supplied as in...