Dear Welder Series…
Received my order today. Your parts are absolutely fabulous. Just as advertised.
I do have a question though. Take a look at the pictures. The threaded bolt that goes into the threaded end of the pan hard bar on the end that gets welded to a bushing has a slight angle cut in it. Different from the others. I was wondering if it was supposed to be welded on an angle for mounting purposes or just a flaw in the cut off the bolt.

Dear Mike…
Hi Mike, thanks for your comments. The adjuster included in the universal panhard kit goes on the red end bracket and is notched on a 5 degree angle to clear the pinion. You’ll also notice the two frame tabs are different lengths – this is to compensate for the angle of the bar at the frame.
Thanks again!
DW Horton