Tie Rod End Mounting Kit

229000

Tie Rod End Mounting Kit 229000

From the outside of the frame rail, the look is traditional, but without the bracket below the frame. On the inside, only a button head shows (now available in both black and chrome plated!)

Hairpin wishbone mount kit to attach an early Ford tie rod end on a split radius rod or hairpin through a 2″ wide boxed frame. The unique taper lock keeps the inside of the boxing plate clean and supports the tie rod end along the whole tapered section, as well as all the threads. Only a button head shows – no cotter pin to snag the cleaning rag or cut your knuckles!

Kit includes parts for both sides: 2 frame bungs, 2 tapered adapters, 2 threaded couplers, 2 split pins, 2 internal tooth lock washers and 2 1/2-20 button head bolts (see options to select black head or chrome plated). Early Ford tie rod ends are NOT included.

Click here to view the instruction sheet for this item

$64.05 In stock
Brand:Welder Series
MPN:229000
Bolt Size:1/2-20
Options Kit with chrome button head bolts (0) Kit with black button head bolts (0)
Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Sequence 1 Sequence 2 Sequence 3 Sequence 4 Sequence 5 Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tucci Hot Rods built Model A Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit Tie Rod End Mounting Kit