Tech Sharing: Pedal and Booster Mounts
Model "A" Frame
Lowdown Hot Rods wanted to use the Welder Series 11802 pedal bracket, but needed the pedal closer to the frame in this Model "A". They also wanted to weld the bracket to the rail, instead of bolting it on. The welded bracket looks cleaner; the bolted bracket is easier to paint.
In the same Model "A" frame, Lowdown mounted the 25804 booster bracket behind the transmission crossmember. Notice that the 25803 gusset is still used to support the bracket.
 
 
Top
copyright © www.welderseries.com