Street Rod Parts Kits Ready to be Welded

“Welder Series' components help me meet the needs of my customers, both pro and do-it-yourselfer. It's a great alternative to assembled products for the customer who wants to fabricate his own part. Hands-on builders recognize the quality and value.”
Paul Barber, owner of Horton Hot Rod Parts in Milton, Ontario, a major dealer in the huge metropolitan Toronto area.

“Lowdown uses Welder Series parts because we often have to custom fit kits to our chassis anyway. Their parts let us do the adjusting when it's easier - before the kit is all welded. We also like being able to buy Welder Series time-saving brackets."
Tom Vandergeld, Lowdown Hot Rods

“Note DW and Paul Horton at Welder Series absolutely rock and were quick, prompt, by far the best communication I've had with an online vendor in a LONG LONG TIME… (Sorry but their response time was bar none awesome).”
Mike in Green Bay, WI. Follow Mike's ‘47 Ford 1.5 Ton pickup build on the H.A.M.B: click here.

“Wow: What a good company to do do business with. Good communication and shipping plus great catalog. Thanks.”
roundvalley on the H.A.M.B

“Top shelf company, you wont find a nicer company to order from. Awesome prices great products super catalog, I'll be ordering from these guys again
thanks steve (gearsforguts)”
gearsforguts on the H.A.M.B

“I have purchased a few of the products that Welder series offers and been pleased each time. The products are as advertised and they ship in a timely manner.

I am also impressed with their customer service. I asked them if they had a brake pedal kit (mount, pivot, pedal, bushings, etc) for a right hand drive application. They did not have a kit per se but were able to put together pieces from their catalog to make one I could modify the Master Cylinder mount to make it face the other way (I had to cut the top off and weld it back on facing the other way, cheaper than ordering a one off part, and I don't have a way to bend metal that thick, everything else fit up as intended). It worked as they described. I however did use a different pedal and MC assembly (I hadn't left myself enough room), but I still have this one, and I'm scheming on what to put it in.”
Erik in Anchorage, AK

“I had a good experience with this company too. My part was very reasonable, and shipped to me quickly. There was good communication too, which I definitely appreciate when doing deals over the net. Will definitely do business with again.”
Jeff in Mosinee, WI

“I just finished installing a Welder Series rear sway bar kit over the weekend. My all-steel ‘35 sedan handled in the traditional “scrape off the running boards” way….even with a front sway bar. The kit went together nicely, everything fit perfectly and now the car goes around a corner 100% better….no more extreme lean.
DW was a huge help in putting together a little bit different kit for me since I am using a tubular rear crossmember and also made some suggestions that really helped in the fabrication. You can depend on these guys….they are “for real” hot rod guys that offer really cool products. I'll post a picture or two when I get the chance to put the car on a hoist for a better photo op.
Thanks DW & crew.”
Retrorod on the H.A.M.B

“Great to do biz with, got a complete 4 bar set up for my A to install my 8? rear axle, all of it looks 1st class..cant wait to get into mounting it.. DW Horton was a great help and set me in the right direction. I will add them to my list of vendors to continue to do business with.”
Randy in MI

“Hey guys, just wanted to let you know that my ‘35 sedan with one of your rear sway bar kits installed just completed over 5000 miles of great fun and adventure on Route 66. The sway bar made the return trip over the Rockies a real fun part of the trip, the car handled like a go-kart!!!

Thanks for putting a product out and backing it up with tech help and assistance when needed. You guys helped me work out a couple mount problems and it came out perfect…..and after a 5000 mile trip it's still perfect.

Good job…thanks!!”

Retrorod on the H.A.M.B

" Parts were perfect, thanks a lot. My current project, a '51 F1, is damn near done, but up next is a '33 Chevy 5-window coupe, I think I'm going to use your suspension components for a Ford-style transverse leaf in the front, and a triangulated rear setup with coilovers. You guys are building some very nice stuff and making a name for yourselves."
Gary in MT

" Yes, every thing arrived in good condition and in a timely matter, I'm very pleased with my order,and your customer service, I was having some problems understanding the directions, then I realized my mustang frame has no rake and is even dimensions top , bottom, side to side is the same, I was trying to make it much harder then it should be, I will recommend your products to my friends."
Vern in MI