Email #9
Things To Do With A Bracket, Exhaust Edition
20% off exhaust stuff!!
I'm getting a bit exhausted trying to think of a subject for this newsletter. Maybe it's because I've just plain run out of gas. Whatever the reason, I hope you'll enjoy this newsletter that I fumed so much over.
I'm going to accomplish two things in this newsletter. I'm going to show you our neat exhaust hangers and flanges, then give you a deal. That's it.
The top two brackets are 11 gauge (about 1/8") mild steel so you can weld them to a crossmember, or mount them in some other creative way. The holes are 3/8" diameter.

The bottom two brackets are stainless and get welded to your exhaust tube. They're also 11 gauge.

Note that you can use either the single hole or double hole brackets... the double hole is good for extra heavy exhaust systems, or for mounting the bracket on the side of the exhaust tube to keep it from swivelling.

The holes are sized for the "Snapper" grommet - a high heat plastic type insulator which uses a 3/8" bolt through the middle. The grommet sandwiches the stainless plate.


Pricing:
Double hole SS exhaust plate , #21345, $10.50/ea
Double hole frame plate , #21346, $6.00/ea
Single hole SS exhaust plate , #21347, $9.00/ea
Single hole frame plate , #21348, $5.00/ea
Snapper grommet, #BR92318, $1.50/ea

Two Week Special
Buy any combination of four or more and take 20% off!
Offer expires Nov. 9/07.

If you want the terrific deal, give us a call. Heck, it's free: 1-888-648-2150.

We've got Flanges!
They match the Mr Gasket #5980 gasket. 3/8" holes are on 3-1/32" centers. All three are 1/4" thick.
Mild steel, for 2-1/4" tubing. #21831, $8.40
Mild steel, for 2-1/2" tubing. #21832, $8.40
Stainless steel, for 2-1/2" tubing. #21836, $21.55

Same deal on the flanges - buy four or more of any size and take 20% off.
And remember...
Top
copyright © www.welderseries.com