Model A Frame Parts
Over the years, we've built countless Model A frames. These parts developed out of those frames, but it's not necessary to build your frame the same way we did ours (bolded items are online store links).
- Front Panhard kit; $91.35
- Brake pedal/ master cylinder bracket; $118.60
- Model A hood latch bracket ; $5.80
- Model A body mount ; $5.25
- Transmission crossmember ; $48 or $73 with a 1-1/2" x 3" x 40" tube
- Rear Panhard kit ; 8" $86.61, 9" $100.11
- Rear coil-over mounting kit ; $50.70
- Rear outside body mount ; $5.78
- Rear crossmember kit ; $61
- Rear sway bar ; $260.30
'32 Ford Frame Parts
Same deal with our '32 parts... they have been designed for a '32, but are able to be adapted to most frames (bolded items are online store links) .
- Front Panhard kit; $91.35
- Brake pedal/ master cylinder bracket ( also available in under-seat design ); $121.35 ($196.45 for remote under-seat design)
- Rear Panhard kit ; 8" $86.61, 9" $100.11
- Rear sway bar ; $240.70
- Frame rail boxing plates ; $148/ set
- Rear spreader bar flange ; $5.25/ea
These are the parts for each car that have been designed for that car... don't forget other frame parts that will work, like motor mounts (GM, Ford, Chrysler), Vega steering box bracket , shock mounts , C notch plates , clamp plate & U-bolt kit , U-bolt eliminator kit , etc.
Just think of all the waste you'll save by using the Versatab!
Whether it's motor mounts, seat brackets, alternator brackets, body mounts, whatever - the Versatab is a nice shape to be able to be useful for just about any job. It's usually the first plate we turn to when we're trying to solve a bracket problem. You can buy them in packs of eight, or however many you need.
6-7/8" long with a 3/8" dia hole 6-1/4" from the opposite side. Only $4.50 each.
Here's our NSRA new products display for the Versatab at Louisville.
Welder Series Useful Links (top of page)
Thanks for browsing this email. Please let me know if you have any ideas for future content - I'd love to hear from you.