4-Link kit, rear, for large 1205 urethane bushings. This kit is designed for 1932-34 Fords, but has proven to be adaptable to many frames. The bars mount beside the frame rail (inside the frame or outside, as shown in the pics below). The upper bar will be about 3" above the bottom of the rail. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are about 25'' c-c. (4 bars #2262310 are included in the kit. Other lengths are available. See the parts section under ''Bars''). WS222501

Parts included:
Listed by Description, Part #, Quantity Required
Formed frame brackets for 1205 bushings, 222505, 4
Frame bracket formed plate, driver, 222016D, 1
Frame bracket formed plate, passenger, 222016P, 1
Rear axle bracket side plate, formed, 207610, 2
3 hole supporting block, 21854, 2
Adjuster studs, 3/4-16 RH, straight, 100710R, 4
Tubes for urethane bushings, 21309, 8
Urethane bushing half, 1205, 16
Inner sleeve for urethane bushing, 18918, 8
Bars, 1'' dia x 23-1/4'' long, 2262310, 4
Bolt, 1/2-20 x 2-3/4", 8
Nut, 1/2-20 thin nylok, N08FRNTZ, 8
Nut, 3/4-16 jam, 4

Lowdown Hotrods wanted to mount the frame bracket lower, so they added a plate (gussets are hidden in this pic).

You may also be interested in:
Axle Brackets for Air Bags.
Universal panhard kit.
Four bar kit w/standard bushings.