Motor mounts, small block Chev. Stock, non-interlocking GM insulators (side mounts) are used with this kit to absorb motor vibrations. The C005 motor mount is designed to use “short & wide type” GM insulators. These insulators have an inside width, between the ears, of 2-5/8”. There is also a “tall & narrow type” insulator that is 2-3/8” between the ears. This insulator will not fit the C005 mount. (Insulators not included in this kit.) The rubber insulator rests on the pad surface. Formed ears eliminate the common tube and long bolt support. A laser cut slit in the main plate allows the mount to be positioned at the height you require. The oversized gusset gets trimmed to provide support. Clear instructions show how to use this kit to put a Chev motor in frames from T-buckets to Ford F100's. C005

Motor Mounting Tech Tips.

Parts Included:
Plate, Chev motor mount w/ laser cut slit, C009, 2
Gusset, 8" x 8", C006, 2
Bolt, 7/16-14 x 1-1/4 rh grade 5 hex, zinc plated, B07CR1.25G5HZ, 4
Nut, 7/16-14 rh nylok lock, zinc plated, N07CRNZ, 4
Washer, 7/16 SAE, zinc plated, W07SZ, 8