Welder Series Online Store - Street Rod and Hot Rod Parts Kits Ready-to-Weld

4-Link kit, rear, pro street
[WS212470]

$400.00

Click to enlarge

Four link kit, rear, pro street - Made with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames. The 1" diameter seamless bars, with the adjusters installed, have a nominal length of 21" center-to-center. The brackets are 1/4" steel. The adjuster bolt holes are 5/8" except for the front upper holes which are 1/2". This allows finer upper bar instant center angle adjustment. Urethane bushings and inner sleeves are included. The axle brackets have a 1/2" hole to mount the coil-over and a 3/8" hole to mount a sway bar or wheelie bars. #WS212470

Click here to view assembly and installation instructions for this kit.

Parts included
Listed by Description, Part #, Quantity required:
Adjuster stud, 3/4-16 LH, notched, #100710L, 4
Adjuster stud, 3/4-16 RH, notched, #100710R, 4
Tube for urethane bushings, #10092, 8
Nut, 3/4-16 LH jam, #NJL576PL, 4
Nut, 3/4-16 RH jam, #NJ576PL, 4
Bar, 1"x18", tapped 3/4-16 L&R, #127180, 4
Frame side plate, #212402, 4
Rear axle bracket side plate, #21462, 4
Urethane bushing half, #1203, 16
Tube, inner, for urethane bushing, 1/2" ID, #18908
Tube, inner, for urethane bushing, 5/8" ID, #18910
Bolt, 1/2-20 x 2-1/4, #B08FR2.5G5HZ, 2
Bolt, 5/8-18 x 2-1/2, #HC-201, 6
Nut, 1/2-20 thin nylok, #178-039, 2
Nut, 5/8-18 thin nylok, #N10FRNTZ, 6

Available Options:
Kit:

This product was added to our catalog on Wednesday 08 October, 2008.