Welder Series Online Store - Street Rod and Hot Rod Parts Kits Ready-to-Weld

Motor Mount Kit for GM LS-1 and LS-6
[WSLS200]

$138.80

Click to enlarge

Motor Mount Kit for GM LS-1 and LS-6
These mounts use a urethane bushing to insulate the motor from the frame. Frame mounts are to be trimmed to fit so the motor can be installed at the height required.

Parts included:
Listed by Photo Ref.# (if applic.): Description, Part #, Quantity Required
1: Plate, passenger's side main plate, formed, LS207, 1
2: Plate, driver's side main plate, formed, LS202, 1
3: Gusset, 2-3/4" x 2-1/4", LS206, 2
4: Plate, passenger's side center plate, formed, LS208, 1
5: Plate, driver's side center plate, formed, LS204, 1
6: Plate, 5-1/4" x 4", LS210, 2
7: Gusset, 6-1/4" x 3" with a 1-3/8" dia notch (for a 10092 tube), LS211, 2
8: Tube, 1-3/8" OD x 11 ga wall x 1-1/16" long, 10092, 2
Bolt, 10MM x 1.5 x 25, zinc plated, 330-096ZP, 8
Washer, 10MM lock, zinc plated, 672-006ZP, 8
Urethane bushing half. Can be used with 10092 tube and 18908 or 18910 tubes, 1203, 4
Tube, urethane bushing inner sleeve, 1/2" ID, 18908, 2
Bolt, 1/2-20 RH x 2-1/4" long, Grade 5 hex, zinc plated, B08FR2.25G5HZ, 2
Nut, 1/2-20 RH thin nylok, zinc plated, N08FRNTZ, 2

Available Options:
Kit:

This product was added to our catalog on Monday 04 July, 2005.

Customers who bought this product also purchased

4-Link kit, rear, parallel - universal, for large bushings	Motor mount adapters for Chev LS-1 and LS-6	Motor mount adapters for Chev LS-1 and LS-6
Tube, 3/4" OD x 1/2" ID, 1-3/4" long, for large urethane bushing	Reinforcing plate, 2-1/2'' x 5''	Coil-over wrench