Welder Series Online Store - Street Rod and Hot Rod Parts Kits Ready-to-Weld

Alternator Mount, driver's side mount for SBC
[WS2382]

$42.30

Alternator Mount, driver's side mount for SBC

Click to enlarge

Alternator Mount
Driver's side mount for small block Chev motors with the short water pump (5-5/8" from the block surface to the fan mounting surface). This mount attaches using the water pump mounting holes and the longer bolts supplied in the kit. No cylider head holes are required.The alternator mounts above the intake manifold. Designed for GM pre-computer (generally 1987 and older) alternators. The center of the alternator pulley will be about 7-1/4" above the top water pump mounting bolt hole.

Parts Included:
Listed by Photo Ref.# (if applic.): Description, Part #, Quantity Required
1: Plate, tensioner, 8" long over all with a 5/16" hole and a 3/8" x 2" slot. Used to tension alternator, 23822, 1
2: Plate, main alternator mount. All holes are 3/8", 238211s, 1
3: Gusset, 3-1/8" x 2". Used in alternator mount, 238213, 1
4: Spacer, steel, 3/4" OD x 3/8" ID x 5/8" long, 23824, 1
5: Spacer, steel, 3/4" OD x 7/16" ID x 1-1/8" long, 238214, 1
6: Spacer, steel, 3/4" OD x 7/16" ID x 1-5/16" long, 238215, 1
7: Plate, formed, 2-1/4" x 1-1/2" with a 3/8" hole in the 1-1/2" side, 238212, 1
Bolt, 3/8-16 RH x 1-3/4" long, Grade 5 hex, zinc plated. B06CR1.75G5HZ, 1
Bolt, 3/8-16 RH x 3" long, Grade 5 hex, zinc plated, B06CR3G5HZ, 3
Nut, 3/8-16 RH, nylok, zinc plated, N06CRNZ, 2
Washer, 3/8" SAE, zinc plated, W06SZ, 6

Documentation Included
Installation sheet, #2382IN, 1
Installation sheet, #23821IN, 1

Additional Pictures:

Available Options:
Kit:

This product was added to our catalog on Saturday 02 July, 2005.

Customers who bought this product also purchased

Panhard kit, 9” Ford, rear, for Model A w/stock frame

Transmission Mount, for GM insulator