Dear Welder Series…
Interested in your mustang II crossmember with coil overs. How much does the crossmember weigh and how wide is it outside to outside at the lower control arm mount? Thanks. Steve.
The 56″ crossmember kit with the upper arm brackets and coil-over mounts weighs 32 lbs.
The two crossmember pieces and the plates that run from the top of the crossmember to the inside of the frame weigh 19 lbs.
The lower control arm holes are on 22-1/4″ centers. If the center line is extended each way, the crossmember dimension is 25-5/16″.
I hope this helps.