Transmission Mount Kit
Universal transmission mount designed for GM transmissions.
$48.60 — $80.00
Transmission crossmember mount designed for GM transmissions (T350, T400, 700R4, etc.). The crossmember plate can be welded to a length of 3″ x 1-1/2″ x 1/8″ wall HSS tubing which can also serve as a welded crossmember. The saddle can drop down without disturbing the exhaust. Designed for Model “A” frames but works great in any vehicle that has a flat floor. The plate for the transmission insulator is 6-1/4″ below the bottom of the crossmember tube and about 7″ ahead of the front of the tube. HSS tubing not included. WS2115
Note: The welded kit includes the crossmember tube (3″ x 1-1/2″ x 1/8″ wall x 40″) with tabs welded to the tube.
- Videos:
- Parts Included:
- Plate, transmission mount saddle, 21154, 1 Plate, transmission mount saddle side, 211522, 2 Plate, crossmember saddle mount, 211511, 2 Bolt, 7/16-14 x 1-1/4″ long, Grade 5 hex plated, B07CR1.25G5HZ, 4 Washer, 7/16″ SAE, zinc plated, W07SZ, 8 Nut, 7/16-14 nylok, N07CRNZ, 4
Products related to "Transmission Mount Kit"
-
.jpg?150,150,439151661)
-
Transmission Mount Adapter Plate
$14.60
7" x 3-1/4" x 1/4" thick. 4 holes, 1/2" dia. Two are on 3-3/4" centers, two are on 5-1/2" centers. Designed to adapt a Ford C4 trans. to a GM T350 insulator.
-
-
-
Transmission Mount Plate
$5.70
4-1/2" x 2" with two 7/16" holes on 3-1/2" centers. Weld to a rectangular tube or purchase our #211512.
-
-
Comments