Strut Rod Bracket & Gusset Kit
Use this kit as the frame mounts for stock-style Mustang II strut rods.
$24.00
The strut rod washer is used to tighten bushings that are loose on the 3/8″ bracket. The gussets are 3/16″
- Parts Included:
- Gusset, 3″ x 2-1/4″. 108111, 2
Washer, 2-1/4″OD x 1-1/2″ID x 1/8″ thick for strut rod
bushing, 3018W, 2
Strut rod bracket, 30181, 2
Products related to "Strut Rod Bracket & Gusset Kit"
-
Coil Over Mounting Plate #21902
$10.50
The 1/2'' hole is 8'' from the bottom of the plate and 4'' from the vertical edge. As used in the Welder Series' coil-over style Mustang II kit.
-
Crossmember Plate - Mustang II Front/Bottom
from $40.00
This is the plate that gets folded into the front and bottom of our Mustang II crossmember.
-
Crossmember Plate - Mustang II Rear/Top
from $46.00
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts.
-
-
Mustang II Brake Kit - For Camaro Rotors
from $90.00
Adapts 1982-92 Camaro rotors to Mustang II spindles.
-
Mustang II Brake Kit - For Granada Rotors
from $68.86
Adapts 1975-80 Granada rotors to Mustang II spindles.
-
Mustang II Crossmember, for coil springs
from $223.70
Mustang II crossmember kit, trim-to-fit. Ships for $22-$28. Available in three track widths.
-
-
Mustang II Crossmember, for coil-overs
from $200.00
Mustang II crossmember kit, for conventional coil-overs. Ships for 10% of the price. Available as a welded crossmember or a ready-to-weld kit.
-
.JPG?150,150,237651952)
Rack Mount Spacer Kit
$23.00
Rack mount spacers must be used with 1979 and newer power racks to move the rack centerline to the same position as the stock 1974-78 rack.
-
-1.jpg?150,150,1134048914)
Rack Mount- Mustang II
from $8.00
Supplied flat, this 10 ga. Mustang II rack mount is available with a slot or a hole.
-
-
Comments