Step Notch Kit – Universal

• Online Store
•  » Chassis Parts
•  » Step Notch Kit - Universal

Step Notch Kit - Universal

A universal step notch kit that's easy to assemble and install.

$90.00 — $110.00

Typically used in the mini truck market to drop the frame past the rear axle. 2-5/8″ wide outside. 6-1/2″ from the top of the original frame to the top of the notch. Made from 3/16″ mild steel. Sold in pairs.

The notch depth will vary, depending on how tall the frame rails are, and what sweep the original frame rails have. The S10 we used for our installation article, for instance, has 4″ of axle clearance with 18″ wheels when the frame is laying on the ground.
Priced per pair.

Ready-to-weld. Also available completely welded to save a bit of time.
Alignment tabs. No guesswork when it comes to squaring it up. Easy to clamp while you’re tacking it together.
Weld it off the frame. The majority of the welding is done on your bench, where you can position the piece for the best weld. When you’re done welding the notch, just set it on the frame rail and weld it in place.
Sits on outside top corner of frame rail. If you choose to grind the welds, you’ll have a smooth transition from the notch kit to your frame rails.
Integral inner frame rail boxing plates. The inner plates weld to both the upper and lower flange of a C channel frame rail for strength.

Classic Trucks Magazine installed our step notch in Jim Rizzo’s ’57 Chev pickup. Check out the article: http://www.classictrucks.com/tech/1102clt_welder_series_step_notch_kit/index.html.

Please click here to see a step-by-step assembly and installation guide with lots of pictures.

Customer Video:

Shipping Information:

Ships via UPS for $15 to the lower 48 States and 10 Provinces. No duty or brokerage charges. No surprises. Tracking information will be emailed.