Spindle Nut Kit, Mustang II
When Camaro rotors are used on Mustang II spindles, this nut kit lets you put a cotter pin through the stock spindle hole.
$27.40
The nut is thinner than stock but has a retainer washer pressed on. This provides more thread contact, for greater strength, than nuts that are just cut thinner. The castellated retainer allows precise bearing adjustment. 21364-2
This kit is included in our #2136 Mustang II brake kit.
Products related to "Spindle Nut Kit, Mustang II"
-
-
Crossmember Plate - Mustang II Front/Bottom
from $40.00
This is the plate that gets folded into the front and bottom of our Mustang II crossmember.
-
Crossmember Plate - Mustang II Rear/Top
from $46.00
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts.
-
-
Mustang II Brake Kit - For Camaro Rotors
from $90.00
Adapts 1982-92 Camaro rotors to Mustang II spindles.
-
Mustang II Brake Kit - For Granada Rotors
from $68.86
Adapts 1975-80 Granada rotors to Mustang II spindles.
-
Mustang II Crossmember, for coil springs
from $223.70
Mustang II crossmember kit, trim-to-fit. Ships for $22-$28. Available in three track widths.
-
-
Mustang II Crossmember, for coil-overs
from $200.00
Mustang II crossmember kit, for conventional coil-overs. Ships for 10% of the price. Available as a welded crossmember or a ready-to-weld kit.
-
.JPG?150,150,237651952)
Rack Mount Spacer Kit
$23.00
Rack mount spacers must be used with 1979 and newer power racks to move the rack centerline to the same position as the stock 1974-78 rack.
-
-1.jpg?150,150,1134048914)
Rack Mount- Mustang II
from $8.00
Supplied flat, this 10 ga. Mustang II rack mount is available with a slot or a hole.
-
-
Comments