Online Store

• Online Store

Catalog Products

• Views:

• • 

    Four Link Kit - Pro/Street

    from $400.00

    Made with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames.
  • 

    Frame Bracket #18502

    $7.00

    7-1/4" x 4-3/4" (approx) x 3/16" thick with 2 holes 5/8" diameter on 5-1/2" centers.
  • 

    Motor Mount Adapter Plate, LS1

    $22.60

    For GM LS1 and LS6. Laser cut 3/8" mild steel.
• • 

    Spacer, 1-½" OD x 5/8" ID x ¾" Long

    $7.05

    Used as a spacer for later Mustang II power racks to correct the rack centerline and provide input shaft casting clearance. The rack will require one spacer for each side.
  • 

    Brake Pedal/ Master Cylinder Bracket, 1932 Ford

    from $102.90

    Under the floor, compact master cylinder bracket mounts the brake pedal in double shear. Also available with a clutch pedal add-on.
  • 

    Brake Plunger Tube #12101

    $33.00

    5/8" diameter x 22" long, threaded 3/8-24 RH both ends.
• • 

    Clamp Plate & U-Bolt Kit

    from $26.98

    For early Ford crossmembers.
  • 

    Clamp Plate Spacer #15703

    $5.78

    3-1/2" x 1-3/4" x 1/4" thick. Hole is 9/16".
  • 

    Frame Bracket Kit, Rear - Parallel

    from $80.00

    Holes for the urethane bushings are ½" diameter on 5-1/2" centers. Brackets for the urethane bushings are 10 ga. mild steel and formed for extra strength.
• • 

    Master Cylinder Bracket Pivot Plate

    $4.60

    4-1/4" overall length, hole is 3/8".
  • 

    Mustang II Brake Kit - For Camaro Rotors

    from $90.00

    Adapts 1982-92 Camaro rotors to Mustang II spindles.
  • 

    Rear Crossmember - Model A

    from $69.00

    Designed to wrap around the back of the differential instead of over the top.
• • 

    Rubber Insulators for Chevy Motor Mounts

    $20.00

    Stock-style GM rubber insulator for side mounts. Use with our #C005 frame mount kit.
  • 

    Suicide Spring Perch Kit

    from $55.00

    To mount a spring in front of a 2" round front crossmember.
  • 

    Transmission Mount Plate

    $8.40

    2 slots for 7/16" bolts on 1-1/2" centers for a GM rubber mount.
• • 

    Axle Bracket (Batwings) Kit

    from $57.00

    For four link front suspension. The c-plate is designed to mount the side plates vertically even though the axle boss is on an angle.
  • 

    Axle Bracket Plate - Front #21941

    $5.25

    For front Panhard axle bracket. Used with #21942S.
  • 

    Brake Pedal Arm, Straight

    from $20.00
• • 

    Brake Pedal Bushing Outer Sleeve

    $3.15

    1-3/8" OD x 1-1/16" long. Welds to our brake pedal arms for Delrin bushings.
  • 

    Brake Pedal Frame Mount Plate #11804

    $16.00
  • 

    Gusset, 5-1/2" x 1-3/4"

    $4.00

    Used in 4.6 Ford engine mount kit.
• • 

    Master Cylinder Plunger Rod

    $6.40

    3/8" dia. x 4-1/2" long with a 3/8-24 thread on one end a bullet nose on the other.
  • 

    Motor Mount, Chev Main Plate

    $15.00

    Laser cut 1/4" mild steel with a formed lip to increase strength. Holes are 3/8".
  • 

    Shock Mount Frame Plate

    $5.00

    The center of the notch would be 3" above the frame and 2-3/4" out from the frame. Usually used in pairs with a 3/4" diameter tube (see #10304) welded in the notch.
• • 

    Spacer, 1" OD x 11/16" ID x 1-5/8" Long

    $4.25

    Buy 10, get 10% off!