Catalog Products
- Views:
-
-
-
Spring Hanger Main Plate
$14.00
For 3" diameter axle tube. Center of the spring will be about 6-1/8" behind the axle tube.
-
-
-
Threaded Tube, ¾" OD x ½" Long, 5/16-18 copy
$4.25
Chamfered both ends so that this spacer can be used as a threaded insert, welded into a hole. Great for bolt-on shock mounts, headlight mounts, running board brackets, etc. #21810
-
Trans Adapter Reinforcing Tab
$8.30
Often used with the #WS35010 adapter plate. 2 holes, 3/8" dia on 4" centers.
-
-
Trans Mount Support Bar
$6.80
5-3/8" x 7/8" with holes for 3/8" bolts (one is slotted). Designed for #WS70014 mount kit.
-
Transmission Extension Plate
$30.00
5-½" ID x 10-1/8" long. Holes are for 3/8" bolts. Used with #70007.
-
Transmission Mount Adapter Plate
$18.00
8" x 6-½", formed at the sides for increased rigidity. Designed as part of the #WS35013 T350 adapter but can be used with any of our trans mounts.
-
-
Transmission Mount Plate
$5.70
4-1/2" x 2" with two 7/16" holes on 3-1/2" centers. Weld to a rectangular tube or purchase our #211512.
-
Transmission Mount Plate
$13.00
With two slots for 7/16" bolts on 1-½" centers for a GM rubber insulator. Overall size is 5-½" wide x 4-¾".
-
-
-
Tube, 7/8" OD x 2-½" Long, Notched
$8.40
Notched one end for the #10092 tube. The other end is cut square. This is the upper engine mount tube in our WS2149 engine mount kit.
-
Tube, 7/8" OD x 3-3/8" Long, Notched
$11.65
Designed as the lower tube in our #WS2149 Chevy motor mount kit. Notched for 1-3/8" tube. The other end is angle cut.
-
-
-
Welded Brake Pedal, Manual Brakes
$20.00
Brake pedal arm, with bushing tube welded, includes Delrin bushings. 1-3/8" wide between mounting plates. 5.75:1 ratio.
-
Comments