Mustang II Brake Kit - For Camaro Rotors
Adapts 1982-92 Camaro rotors to Mustang II spindles.
$90.00 — $105.00
Brake kit for 1974 -78 Mustang II and 1974 – 80 Pinto/Bobcat spindles. This kit adapts larger 10-1/2″ Camaro rotors and 1982 – 92 Camaro (or equivalent) calipers for a simple, effective, and inexpensive brake upgrade. Some 14″ wheels will clear the calipers; 15″ and above wheels will clear. The 1982 – 92 Camaro rotors move each wheel in 1/8″ from stock rotors. WS2136
Welded kit includes all hardware shown in ready-to-weld kit.
- Parts Included:
- Plate, brake kit, tapped, for adapting Camaro rotors and calipers to Mustang II spindles, 21362, 2
Nut and washer assembly, 21364, 2
Retainer, for spindle nut, 213643, 2
4: Spacer, threaded 1/2″-20, 221252-A, 2
Spacer, 3/4″ o.d. x 7/16″ i.d. x .425″ long, 21363-A, 2
Bolt, 7/16-14 RH x 1-3/4″ long, Grade 5 hex, zinc plated, B07CR1.75G5HZ, 2
Bolt, 1/2″-20 RH x 2″ long, Grade 5 hex, zinc plated, B08FR2G5HZ, 2
Washer, 7/16″ lock, zinc plated, W07LZ, 2
Washer, 1/2″ lock, zinc plated, W08LZ, 2
Washer, 1/2″ SAE flat, W08SZ, 2 - Assembly Tips:
- Use a pair of 1974 – 78 Mustang II spindles as a fixture. This way the parts will be held in exactly the right place for tack welding.
The end of the threaded spacer (for the ½-20 bolt) should bottom against the slot in the plate. Take the tacked assembly off of the spindles to finish welding. Avoid getting weld inside the threaded spacer.
Be sure to read the installation tip sheets shipped with each kit.
- Assembly Video:
Products related to "Mustang II Brake Kit - For Camaro Rotors"
-
-
-
Brake Pedal Pad Mount Kit
from $24.00
An easy to install pedal pad bracket that makes adjusting the pedal pad angle and ratio simple.
-
-
Coil Over Mounting Plate #21902
$10.50
The 1/2'' hole is 8'' from the bottom of the plate and 4'' from the vertical edge. As used in the Welder Series' coil-over style Mustang II kit.
-
Crossmember Plate - Mustang II Front/Bottom
from $40.00
This is the plate that gets folded into the front and bottom of our Mustang II crossmember.
-
Crossmember Plate - Mustang II Rear/Top
from $46.00
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts.
-
-
Mustang II Brake Kit - For Granada Rotors
from $68.86
Adapts 1975-80 Granada rotors to Mustang II spindles.
-
Mustang II Crossmember, for coil springs
from $223.70
Mustang II crossmember kit, trim-to-fit. Ships for $22-$28. Available in three track widths.
-
Mustang II Crossmember, for coil-overs
from $200.00
Mustang II crossmember kit, for conventional coil-overs. Ships for 10% of the price. Available as a welded crossmember or a ready-to-weld kit.
-
-
.JPG?150,150,237651952)
Rack Mount Spacer Kit
$23.00
Rack mount spacers must be used with 1979 and newer power racks to move the rack centerline to the same position as the stock 1974-78 rack.
-
Comments