Four Link Kit - Pro/Street
Made with 3/4" left and right hand threaded urethane bushed adjusters for street-driven Pro/Street frames.
$400.00 — $440.00
Four link kit, rear, pro street. The 1″ diameter seamless bars, with the adjusters installed, have a nominal length of 21″ center-to-center. The brackets are 1/4″ steel. The adjuster bolt holes are 5/8″ except for the front upper holes which are 1/2″. This allows finer upper bar instant center angle adjustment. Heavy-duty, 1-3/4″ wide urethane bushings and inner sleeves are included. The axle brackets have a 1/2″ hole to mount the coil-over and a 3/8″ hole to mount a sway bar or wheelie bars. #WS212480
The adjusters are the only pieces supplied welded in the welded kit. Also available ready to weld.
- Parts Included:
- Adjuster stud, 3/4-16 LH, notched, #100720L, 4 Adjuster stud, 3/4-16 RH, notched, #100720R, 4 Tube for urethane bushings, #21309, 8 Nut, 3/4-16 LH jam, #NJL576PL, 4 Nut, 3/4-16 RH jam, #NJ576PL, 4 Bar, 1″x18″, tapped 3/4-16 L&R, #127180, 4 Frame side plate, #212412, 4 Rear axle bracket side plate, #212462, 4 Urethane bushing half, #1205, 16 Tube, inner, for urethane bushing, 1/2″ ID, #18908 Tube, inner, for urethane bushing, 5/8″ ID, #18910 Bolt, 1/2-20 x 2-3/4, #CH55144, 2 Bolt, 5/8-18 x 3, #CH56348, 6 Nut, 1/2-20 thin nylok, #178-039, 2 Nut, 5/8-18 thin nylok, #N10FRNTZ, 6
Comments