Flat Front Crossmember

For early Ford transverse leaf springs. This crossmember helps get the frame lower by about 1-1/2 - 2'' compared to a stock Model 'A' crossmember.

$50.50 — $81.50

Crossmember kit, front, flat, for early Ford-style front suspension (transverse leaf). The front face of the crossmember is already formed. Simply fold, by hand, the rear faces along the laser-cut slits and tack in the center plate. Then weld all the edges. This crossmember is 24” wide and can be trimmed to fit your frame. A hole for the spring center bolt is centered in the crossmember. Use a 1-3/4” wide spring.
Also available 28” wide. A 28″ wide crossmember can serve double duty as the front c notches, too.
The Welder Series’ U-bolt eliminator kit is an ideal companion part to use with this crossmember (#WS15710). Stock radiators will need modifications to the lower tank. The ”butterfly” shape of this crossmember gives more strength to the frame and looks way better than a simple channel. WS21864

Parts Included:

Crossmember center plate, 21862, 1
Crossmember main plate, formed, 24” wide, 21864, 1

Assembly Video:

Products related to "Flat Front Crossmember"

- Clamp Plate & U-Bolt Eliminator Kit
  
  from $23.08
  
  Eliminate the clamp plate and U-bolts on your 1928-34 Ford crossmember.
- Clamp Plate & U-Bolt Kit
  
  from $26.98
  
  For early Ford crossmembers.
- Clamp Plate Base, Front #15702
  
  $14.70
  
  4 holes are 1/2", center hole is 9/16". This clamp plate will not fit original u-bolts.
- Clamp Plate Base, Front #15712
  
  $9.50
  
  Clamp plate base for u-bolt eliminator kit WS15710. Center hole is 9/16''. The 2 outer holes are 3/8''. 3/8'' steel. 3-1/2" x 4-3/8".
- Clamp Plate Crossmember Tab #15715
  
  $3.25
  
  Used in our #15710 U-Bolt Eliminator kit, welded to the crossmember. 3-1/2" x 1" with a 3/8" hole.
- Clamp Plate Spacer #15703
  
  $5.78
  
  3-1/2" x 1-3/4" x 1/4" thick. Hole is 9/16".
- Flat Crossmember Main Plate
  
  from $44.00
  
  Used in flat front crossmembers for a solid axle.
- U Bolt, ½-20 thread
  
  $2.35
  
  2-½" ID, 3-½" legs. Use with #15702 clamp plate. Does not fit stock Ford clamp plates.