Crossmember Plate - Mustang II Front/Bottom
This is the plate that gets folded into the front and bottom of our Mustang II crossmember.
$40.00 — $46.00
Products related to "Crossmember Plate - Mustang II Front/Bottom"
-
Crossmember Plate - Mustang II Rear/Top
from $46.00
This is the plate that gets folded into the rear and top of our Mustang II crossmember, including the rack mounts.
-
Mustang II Brake Kit - For Camaro Rotors
from $90.00
Adapts 1982-92 Camaro rotors to Mustang II spindles.
-
Mustang II Brake Kit - For Granada Rotors
from $68.86
Adapts 1975-80 Granada rotors to Mustang II spindles.
-
-
Mustang II Crossmember, for coil springs
from $223.70
Mustang II crossmember kit, trim-to-fit. Ships for $22-$28. Available in three track widths.
-
Mustang II Crossmember, for coil-overs
from $200.00
Mustang II crossmember kit, for conventional coil-overs. Ships for 10% of the price. Available as a welded crossmember or a ready-to-weld kit.
-
.JPG?150,150,237651952)
Rack Mount Spacer Kit
$23.00
Rack mount spacers must be used with 1979 and newer power racks to move the rack centerline to the same position as the stock 1974-78 rack.
-
-
-1.jpg?150,150,1134048914)
Rack Mount- Mustang II
from $8.00
Supplied flat, this 10 ga. Mustang II rack mount is available with a slot or a hole.
-
-
Spacer, 1" OD x 5/8" ID x 0.348" Thick
$2.30
Designed as the spacer used on the Chrysler K772 lower ball joint, under the nut, on a Mustang II spindle.
-
-
Spacer, 1-½" OD x 5/8" ID x ¾" Long
$7.05
Used as a spacer for later Mustang II power racks to correct the rack centerline and provide input shaft casting clearance. The rack will require one spacer for each side.
-
Comments