Tubes

Tubes

Views:

- Urethane Bushing Outer Sleeve
  
  from $3.15
  
  This is the tube that the urethane bushing kits fit into. Available for both large and standard bushings.
- Steel Tubing - Make Your Own Bars
  
  from $11.00
  
  Available in 1 foot increments, 4 feet maximum length per tube.
- Steering Shaft Bearing Support
  
  $15.00
  
  1" seamless tubing, one end threaded 3/4-16 to take a rod end. Cut the tube to length and weld it in a convenient spot.
- Tube, 1" OD x 5/8" ID x 3-3/8" Long
  
  $10.00
  
  Used in our lower control arm mounting kit and rear coilover mounts.
- Tube, Urethane Bushing Inner Sleeve
  
  from $4.40
  
  Available for ½" or 5/8" bolts, for large and regular bushing sizes.
- Tube, 7/8" OD x 1/2" ID x 2-1/4" Long
  
  $8.25
  
  This tube keeps the frame rail from being crushed. Also used in our universal rear Panhard kit.
- Spacer, 1-½" OD x 5/8" ID x ¾" Long
  
  $7.05
  
  Used as a spacer for later Mustang II power racks to correct the rack centerline and provide input shaft casting clearance. The rack will require one spacer for each side.
- Brake Pedal Bushing Outer Sleeve
  
  $3.15
  
  1-3/8" OD x 1-1/16" long. Welds to our brake pedal arms for Delrin bushings.
- Sway Bar Outer Tube
  
  $40.00
  
  1-3/8" OD x 11 ga. Available in three lengths.
- Tube, 1" OD x ¾" ID x 2-¼" Long
  
  $5.00
  
  Designed for 2-¼" shackles with ¾" diameter bushings. #20952
- Tube, 7/8" OD x 2-½" Long, Notched
  
  $8.40
  
  Notched one end for the #10092 tube. The other end is cut square. This is the upper engine mount tube in our WS2149 engine mount kit.
- Tube, 7/8" OD x 3-3/8" Long, Notched
  
  $11.65
  
  Designed as the lower tube in our #WS2149 Chevy motor mount kit. Notched for 1-3/8" tube. The other end is angle cut.
- Tube, ¾" OD x 7/16" ID x 1-7/8" Long
  
  $4.50
  
  Used in our front shock bracket kit.