Spacers

Spacers

Views:

- Spacer, 1" OD x 5/8" ID x 0.348" Thick
  
  $2.30
  
  Designed as the spacer used on the Chrysler K772 lower ball joint, under the nut, on a Mustang II spindle.
- Aluminum Spacer for Coil-Overs
  
  $5.00
  
  Spaces the coilover away from the rear axle bracket. Can be used in many more applications. 1-3/8" long, for 5/8" bolt.
- Spacer, 1" OD x 16mm ID x 2" Long
  
  $6.75
  
  Clearance for a 5/8" bolt. Buy 10, get 10% off!
- Spacer, 1" OD x 16mm ID x 1-3/8" Long
  
  $4.00
  
  Buy 10, get 10% off!
- Spacer, ¾" OD x ½" ID x 1-⅝" Long
  
  $4.50
- Spacer, 1-½" OD x 5/8" ID x ¾" Long
  
  $7.05
  
  Used as a spacer for later Mustang II power racks to correct the rack centerline and provide input shaft casting clearance. The rack will require one spacer for each side.
- Spacer, 1" OD x 11/16" ID x 1-5/8" Long
  
  $4.25
  
  Buy 10, get 10% off!
- Spacer, ¾" OD x 7/16" ID x .425" Long
  
  $4.00
  
  Used in our Mustang II brake kit for Camaro rotors.
- Spacer, ¾" OD x 7/16" ID x 1-⅝" Long
  
  $4.00
- Spacer, ¾" OD x 7/16" ID x 1-5/16" Long
  
  $4.25
- Spacer, ¾" OD x 7/16" ID x ¼" Long
  
  $3.00
- Spacer, ¾" OD x 7/16" ID x ½" Long
  
  $4.25
  
  Used in our Vega steering box bracket kit.
- Spacer, ¾" OD x 7/16" ID x ⅝" Long
  
  $3.00
  
  Used in our Mustang II brake kit for Granada rotors.
- Spacer, ¾" OD x ⅜" ID x ⅝" Long
  
  $4.25
  
  #23824.