Rear Suspension Parts

Views:

Pages:

- Urethane Bushing Kits
  
  from $9.30
  
  Includes two bushing halves and one inner sleeve.
- Urethane Bushing Outer Sleeve
  
  from $3.15
  
  This is the tube that the urethane bushing kits fit into. Available for both large and standard bushings.
- Axle Tab, Upper
  
  $3.25
  
  Upper axle tab for triangulated four link kits.
- Adjuster Kits
  
  from $15.40
  
  Threaded adjusters available tig welded or ready-to-weld.
- Frame Bracket, Upper, Formed, for Triangulated Four Link
  
  $32.00
  
  Comes off the frame at a 27° angle, but can easily be trimmed for a different angle, if required.
- Axle Bracket - Rear, Triangulated
  
  from $22.00
  
  Designed for the triangulated rear 4-link kit to mount the coil-over and the lower bar
- Frame Bracket, Formed
  
  from $14.00
  
  10 ga. steel. Hole is 1/2" dia, 2-5/8" from the opposite edge. Base is 3-1/2".
- Axle Bracket - Rear, Parallel
  
  from $21.00
- Frame Bracket, Lower, Formed, for Four Link Kits
  
  $12.00
  
  Designed for 1932-34 Ford rear four link kits, but has been used in many other applications.
- Adjuster Studs
  
  from $8.50
  
  Adjuster studs available in 3/4-16 and 5/8-18 threads, and for large or standard bushings. Great for custom bars!
- Coil-Over Support Block
  
  $14.00
  
  3" x 1" x 1" with 3 holes, 5/8" dia on 1" centers.
- Axle Bracket Kit - Rear, Triangulated 4 Link
  
  from $36.00
  
  Axle brackets are available separately if you're doing something completely custom. Available with or without upper bar axle tabs.
- Rear Crossmember Kit
  
  from $48.00
  
  A simple upper coilover mount crossmember for your rear suspension.
- Bars, 1" OD
  
  from $33.00
  
  1" OD bars with either 5/8-18 or 3/4-16 threads, available for large or regular bushing sizes.
- Rear Shock Mount, Lower
  
  $20.00
  
  Designed as a lower shock mount for the rear end. Heavy-duty 3/16" formed steel for greater strength.
- Frame Bracket, #21194
  
  $8.00
  
  Use on frames made from rectangular tubing with no taper when viewed from the side.
- 8.8 Ford Upper Four Link Mount
  
  $20.00
  
  Formed upper mounts for your Ford 8.8 or GM rear end.
- Axle Bracket Kit, for Coil-Overs
  
  from $64.00
  
  Heavy-duty 3/16" formed steel, available with or without a coil-over bolt kit.
- Air Spring Mounting Plate
  
  $8.00
  
  Mounts many rear air springs.
- Coil Over Wrench
  
  $7.75
  
  Designed for notched threaded spring collars. Can also be used with collars that have a hole in them by rounding off the tip.
- Axle Bracket Kit - Parallel Four Link
  
  from $70.00
  
  Combination rear axle bracket/ lower coilover mount.
- Frame Bracket Kit - Triangulated
  
  from $64.00
  
  As used in our triangulated four link kit for the lower bar. Formed bracket has 1/2" holes.
- Axle Bracket Kit - Combination Air Spring/ 4-Link
  
  from $87.20
  
  Mount your air springs on the same bracket as your parallel four link bars.
- Four Link Frame Bracket Kit, Model A, Rear
  
  from $22.50
  
  2 holes, 5/8" diameter, on 5-1/2" centers.
- Frame Bracket #18502
  
  $7.00
  
  7-1/4" x 4-3/4" (approx) x 3/16" thick with 2 holes 5/8" diameter on 5-1/2" centers.