Handy Parts

Views:

Pages:

- Exhaust Grommet
  
  from $1.50
  
  Grommet made from high-temp urethane for insulating the exhaust pipes from the frame. Use with Welder Series' exhaust hangers. Now available: Super hi-temp blue grommets.
- Gusset with 3 holes, 90 degree
  
  from $4.00
  
  10 ga. steel, available 3"x3" and 5"x5".
- Urethane Bushing Kits
  
  from $9.30
  
  Includes two bushing halves and one inner sleeve.
- Reinforcing Plate (fishplate)
  
  from $2.75
  
  2-1/2" x 5", used to reinforce a butt-welded joint. 10 ga mild steel. Available with or without a hole in the middle.
- Urethane Bushing Outer Sleeve
  
  from $3.15
  
  This is the tube that the urethane bushing kits fit into. Available for both large and standard bushings.
- Frame Bracket - "VersaTab"
  
  from $3.00
  
  Use this plate as a motor mount frame plate, a hiboy shock mount, a bracket off of a round tube, or in lots of other places. This is a very versatile plate.
- Axle Tab, Upper
  
  $3.25
  
  Upper axle tab for triangulated four link kits.
- Brake Tab
  
  $2.00
  
  For mounting flexible brake lines to the frame.
- Frame Bracket, 3-1/2" x 3-1/4"
  
  from $4.30
  
  3-1/2" x 3-1/4" with one 1/2" dia hole, 2-5/8" from opposite edge. Buy 10, get 10% off.
- Tucci Tab
  
  $2.50
  
  1-7/8" across the base, 1-1/4" high with a 1/8" pilot hole. Handy to have in the shop. 10 ga steel.
- Frame Tab, #18201
  
  $2.85
  
  The center of the 1/2" hole is 1-1/8" from the opposite edge. 10 ga steel. #18201
- Unholes
  
  $5.00
  
  Great to use for filling holes in firewalls, frame rails, the ends of tubing, or anywhere there is a hole that needs to be "unholed". In diameters from 3/8" to 1-7/8". PKG of 10.
- Steel Tubing - Make Your Own Bars
  
  from $11.00
  
  Available in 1 foot increments, 4 feet maximum length per tube.
- Frame Bracket, Upper, Formed, for Triangulated Four Link
  
  $32.00
  
  Comes off the frame at a 27° angle, but can easily be trimmed for a different angle, if required.
- Gusset, 1-1/2" x 2"
  
  $3.50
- Frame Bracket, Formed
  
  from $14.00
  
  10 ga. steel. Hole is 1/2" dia, 2-5/8" from the opposite edge. Base is 3-1/2".
- Gusset, 2-3/4" x 3"
  
  $4.90
  
  Lots of applications but often used to gusset the rear crossmember in a Model A with a raised & narrowed rear frame section.
- Urethane Bushing Half
  
  from $2.45
  
  Available in two sizes. Standard uses include four bar bushings and engine mounts.
- Body Mount, Model A #28206
  
  $5.50
  
  A clean, simple Model A front body mount.
- Formed Mount, #00061
  
  $5.00
  
  This bracket has many uses. 3/8" hole is 7/8" from the edge. Overall dimensions are about 4" x 1-1/4".
- Ball Joint Housing
  
  $12.50
  
  For Chrysler screw-in ball joint K772, commonly used in aftermarket Mustang II tubular control arms.
- Air Spring Frame Bracket
  
  $21.00
  
  For F9000 air spring (and similar).
- Shock Mount Plate
  
  $6.80
  
  8-1/8" x 3" with 1 hole, 1/2" dia.
- Air Spring Axle Bracket
  
  $24.00
  
  Mounts many rear air springs.
- Frame Tab, #18200
  
  $2.75
  
  The center of the 1/2" hole is 7/8" from the opposite edge. 10 ga steel. #18200. Halfer sale runs until Nov 30/12.