Gussets

Gussets

Views:

- Gusset with 3 holes, 90 degree
  
  from $4.00
  
  10 ga. steel, available 3"x3" and 5"x5".
- Gusset, 1-1/2" x 2"
  
  $3.50
- Gusset, 2-3/4" x 3"
  
  $4.90
  
  Lots of applications but often used to gusset the rear crossmember in a Model A with a raised & narrowed rear frame section.
- Gusset, 3" x 2-1/4"
  
  $3.60
- Radiator Mount
  
  $7.00
  
  Formed, 1-3/4" x 1-1/2" with a 1" gusset and a 3/8" hole. Designed as a radiator mount but can be used to mount other things. Available for Driver and Passenger sides.
- Gusset, for 1" diameter tube
  
  $4.00
  
  About 2" long.
- Gusset, 5-1/2" x 1-3/4"
  
  $4.00
  
  Used in 4.6 Ford engine mount kit.
- Gusset, 1-1/2" x 1/2"
  
  $2.30
  
  Used in our urethane bushed Ford motor mounts. Notch in the one side is for a 1-3/8" tube.
- Gusset, 6" x 3"
  
  $8.50
  
  The relief along the straight sides minimizes weld distortion and the corner angle cut gives extra clearance.
- Gusset, 6-1/4" x 3"
  
  $6.00
  
  With a notch for a 1-3/8" diameter tube. Often used with plate #LS210 and #10093 tube.
- Gusset, 8" x 8"
  
  $8.50
  
  Used in our #C005 Chevy motor mount kit.
- Gusset, 2-1/16" x 4-3/4" x 1-3/16"
  
  $5.50
  
  Used in our high mount alternator bracket.
- Gusset, 2-3/4" x 2-1/4"
  
  $7.50
  
  Used in our LS1 motor mount kit.
- Gusset, 3-1/2" long
  
  $7.50
  
  Use two of these to support spring plate #21271 when used with a 2" diameter crossmember.
- Gusset, 3-1/4" x 3-1/2", #25803
  
  $5.00
  
  Designed to be used in the #WS25800 booster bracket.
- Gusset, 3-1/8" x 2"
  
  $4.80
  
  Used in our alternator mount kits.
- Gusset, 3-7/8" x 3-7/8"
  
  $8.00
  
  As supplied in our Chrysler motor mount kit.
- Gusset, 7-3/4" x 5-1/2"
  
  $7.00
  
  Used in our #F018 Ford motor mount kit.