Brake Pedal/ Master Cylinder Bracket, Model A

• Online Store
•  » Brakes
•  » Brake Pedal/ Master Cylinder Bracket, Model A

Brake Pedal/ Master Cylinder Bracket, Model A

Under the floor, compact master cylinder bracket mounts the brake pedal in double shear.

$96.90 — $139.00

Master cylinder mount/pedal arm kit. The master cylinder mount is laser cut and formed with holes to mount either Ford or GM master cylinders. The pedal mounts in double shear for strength and to make pedal removal easier – the pedal doesn’t have to slide off a pin. This, in turn, means a smaller hole in the floor. The standard pedal is offset, but boomerang-shaped arms with no offset and straight pedal arms can be substituted. The adjustable pedal mount parts are included.

This kit was designed for Model ‘A’ Fords, but can be used in T-buckets and many other frames. The center of the master cylinder is 2-1/2″ off of the frame rail so a master cylinder with left hand ports should be used. WS13704

Parts Included:

Plate, master cylinder mount, formed, 13702, 1
Plate, pivot for master cylider mount, 20275, 2
Plate, formed pedal mount, 12903, 1
Plate, formed pedal mount, 12901, 2
Plate, brake pedal arm, offset 2-1/2″, 5.75:1 ratio, 3/8″ thick, 10131, 1
Bushing for pedal pivot, Delrin, 20267, 2
Tube for Delrin bushing, 10092, 1
Rod end, 3/8″ female rh, CW-06, 1
Plunger rod, 3/8″ dia x 4-1/4″ long with a 3/8-24 thread on one end and a bullet nose on the other, 20264, 1
Nut, 3/8-24 rh jam, N06FRJZ, 1
Bolt, 3/8-16 x 1-1/2″ RH grade 5 hex, zinc plated, B06CR1.5G5HZ, 1
Bolt, 3/8-16 x 2-1/2″ RH grade 5 hex, zinc plated, B06CR2.5G5HZ, 1
Nut, 3/8-24 R.H. nylok, zinc plated, N06CRNZ, 2
Washer, 3/8″ SAE, zinc plated, W06SZ, 4
Bolt, 3/8-16 x 1-1/4″ s.s. button head (for the pedal mount), 370-423, 1
Nut, 3/8-16 s.s. (for pedal mount), HN-2012, 1
Washer, 3/8″ internal tooth lock, s.s., W-2069, 3

Documentation Included:
Assembly sheet for pedal mount, 12900IN, 1