Brake Pedal/ Master Cylinder Bracket, 1932 Ford

• Online Store
•  » Brakes
•  » Brake Pedal/ Master Cylinder Bracket, 1932 Ford

Brake Pedal/ Master Cylinder Bracket, 1932 Ford

Under the floor, compact master cylinder bracket mounts the brake pedal in double shear.

$102.90 — $144.00

Master cylinder mount/pedal arm kit. The master cylinder mount is laser cut and formed with holes to mount either Ford or GM master cylinders. The pedal mounts in double shear for strength and to make pedal removal easier – the pedal doesn’t have to slide off a pin. This, in turn, means a smaller hole in the floor. The standard pedal is offset, but boomerang-shaped arms with no offset and straight pedal arms can be substituted. The adjustable pedal mount parts are included. This kit was designed for 1932 Fords, but can be (and has been) used in many other frames. The center of the master cylinder is 4-1/4″ off of the frame rail so a master cylinder with either left hand or right hand ports can be used. WS20281.

If you’re looking for a compact brake/ clutch pedal kit, it’s easy to add a second pedal to this bracket. If you choose this option, both pedals are supplied unbent, and you will have to cut an extra slot as shown in the video. Clutch linkage must be fabricated. A pedal pad bracket is included with this option.

NOTE: Bracket is now supplied without the windows to make adding a clutch pedal easier.

Parts Included:

Plate, master cylinder mount, formed, 20276, 1
Plate, pivot for master cylider mount, 20275, 2
Plate, brake pedal arm, offset 2-1/2″, 5.75:1 ratio, 3/8″ thick, 10131, 1
Bushing for pedal pivot, Delrin, 20267, 2
Tube for Delrin bushing, 10092, 1
Rod end, 3/8″ female rh, CW-06, 1
Plunger rod, 3/8″ dia x 4-1/4″ long with a 3/8-24 thread on one end and a bullet nose on the other, 20264, 1
Plate, formed pedal mount, 12903, 1
Plate, formed pedal mount, 12901, 1
Nut, 3/8-24 rh jam, N06FRJZ, 1
Bolt, 3/8-16 x 1-1/2″ RH grade 5 hex, zinc plated, B06CR1.5G5HZ, 1
Bolt, 3/8-16 x 2-1/2″ RH grade 5 hex, zinc plated, B06CR2.5G5HZ, 1
Nut, 3/8-24 R.H. nylok, zinc plated, N06CRNZ, 2
Washer, 3/8″ SAE, zinc plated, W06SZ, 4
Bolt, 3/8-16 x 1-1/4″ s.s. button head (for the pedal mount), 370-423, 1
Nut, 3/8-16 s.s. (for pedal mount), HN-2012, 1
Washer, 3/8″ internal tooth lock, s.s., W-2069, 3

Documentation Included:
Assembly sheet for pedal mount, 12900IN, 1