Booster Bracket & Pedal Kit

Universal under-floor booster/pedal bracket mounts the pedal in double shear.

$91.65 — $137.00

Booster Bracket & Pedal Kit to mount under the floor. This kit is simple to trim to fit many under floor applications. The bracket mounts either a 7″ (single or dual diaphragm) or 8″ dual power booster. As supplied, the center of the booster will be 4-1/4″ off of the boxing plate. The bracket also has holes for a GM or Ford manual master cylinder if the booster is not being used. (In this case one of the 5.75:1 pedals should be used.) The pedal is offset for right foot braking and a stainless, adjustable pedal pad mount is included. The brake pedal mounts to the bracket in double shear for extra strength. This type of pedal mount lets you drop the pedal down instead of sliding it off of a pin so the hole in the floor can be smaller. A 3/8″ female rod end is included in the parts list. The bracket will mount Ford or GM manual master cylinders and either 7″ (single or dual) or 8″ dual boosters. Booster mounting holes are 3-3/8″ x 3-3/8″. This will fit the common street rod power boosters. WS24806.

Clutch Pedal Add-On:: A second gusset is added to support the clutch pedal in double shear. The pedals are supplied with no offset so they can be bent to clear the steering column. Pedal pad mounts are included. Clutch linkage must be fabricated.

Products related to "Booster Bracket & Pedal Kit"

- Booster Bracket & Pedal Kit, Under Seat Mount
  
  from $192.60
  
  This pedal mounting kit locates the booster under the seat, while still mounting the pedal in double shear. Available fully welded or ready to weld.
- Brake Booster Bracket, Formed
  
  $23.00
  
  Accepts Ford or GM master cylinders and either 7" or 8" boosters.
- Brake Pedal Arm For Manual Brakes/ Clutch
  
  from $31.00
  
  Brake pedal with a 5.75:1 ratio, designed for manual brake systems. Can also be used as a clutch pedal.
- Brake Pedal Arm For Power Brakes
  
  from $23.00
  
  Brake pedals, designed for power brake applications (4.5:1).
- Brake Pedal Bushing Half - Delrin
  
  $5.00
  
  Delrin bushing, used in all our brake/ clutch pedal bracket kits.
- Brake Pedal Pad Mount Kit
  
  from $24.00
  
  An easy to install pedal pad bracket that makes adjusting the pedal pad angle and ratio simple.
- Gusset for Brake Booster Bracket, #24807
  
  $5.00
  
  1 leg (driveshaft side). 3/16" steel, with a 3/8" hole. Used in WS24806. Picture is on 1" x 1" grid.
- Gusset for Brake Booster Bracket, #24808
  
  $5.75
- Pedal Pivot Pin
  
  $6.50
  
  Pedal mounting section is 5/8" dia x 1-3/8" long. Large section is 1" dia x 2-3/8" long. Threaded end is 7/16-20.