Axle Bracket Kit, for Coil-Overs

Heavy-duty 3/16" formed steel, available with or without a coil-over bolt kit.

$64.00 — $88.00

Heavy-duty 3/16″ formed steel for greater strength. Also available as a kit with #21854 support blocks, coil-over bolts, nuts, washers, and spacers. The 3 holes are 5/8″ diameter on 1″ centers. The lowest hole is 4-1/2″ below the bottom of the axle tube. Made to fit 3″ diameter axle tubes.

Available with the coil over support blocks welded or ready-to-weld.

Priced in pairs.

Products related to "Axle Bracket Kit, for Coil-Overs"

- Aluminum Spacer for Coil-Overs
  
  $5.00
  
  Spaces the coilover away from the rear axle bracket. Can be used in many more applications. 1-3/8" long, for 5/8" bolt.
- Axle Bracket - Rear, Parallel
  
  from $21.00
- Axle Bracket - Rear, Triangulated
  
  from $22.00
  
  Designed for the triangulated rear 4-link kit to mount the coil-over and the lower bar
- Axle Bracket Kit - Parallel Four Link
  
  from $70.00
  
  Combination rear axle bracket/ lower coilover mount.
- Bolt Kit for Rear Coil-Overs
  
  from $16.26
  
  Spacers are 1-3/8" long to space the coil-over away from the rear axle. The washers on the back side keep the coil-over from slipping over the bolt head.
- Coil-Over Support Block
  
  $14.00
  
  3" x 1" x 1" with 3 holes, 5/8" dia on 1" centers.
- Rear Shock Mount, Lower
  
  $20.00
  
  Designed as a lower shock mount for the rear end. Heavy-duty 3/16" formed steel for greater strength.
- Spacer, 1" OD x 16mm ID x 1-3/8" Long
  
  $4.00
  
  Buy 10, get 10% off!