Adjuster Kits
Threaded adjusters available tig welded or ready-to-weld.
$15.40 — $22.70
These adjuster kits use a CNC machined stud which is notched to accept the matching tube. Available in 5/8-18 or 3/4-16 threads and with tubes to accept either standard bushings (1-3/8″ wide) or large bushings (1-3/4″ wide). Standard bushing adjusters are only available welded.
Urethane bushings must be ordered separately. Parts included in one adjuster kit: threaded stud, tube, and jam nut.
Please see available options: 3/4-16 adjusters are only available straight, and 5/8-18 adjusters are not available in left hand threads.
Products related to "Adjuster Kits"
-
.jpg?150,150,2426929122)
Adjuster Studs
from $8.50
Adjuster studs available in 3/4-16 and 5/8-18 threads, and for large or standard bushings. Great for custom bars!
-
Ball Joint Housing
$12.40
For Chrysler screw-in ball joint K772, commonly used in aftermarket Mustang II tubular control arms.
-
Bars - 7/8" OD
from $31.00
7/8" bars, threaded 5/8-18 one end and notched for a 1-3/8" urethane bushing eye.
-
-
Bars, 1" OD
from $33.00
1" OD bars with either 5/8-18 or 3/4-16 threads, available for large or regular bushing sizes.
-
Frame Bracket, #21194
$8.00
Use on frames made from rectangular tubing with no taper when viewed from the side.
-
Steel Tubing - Make Your Own Bars
from $11.00
Available in 1 foot increments, 4 feet maximum length per tube.
-
-
Urethane Bushing Half
from $2.45
Available in two sizes. Standard uses include four bar bushings and engine mounts.
-
-
Urethane Bushing Outer Sleeve
from $3.15
This is the tube that the urethane bushing kits fit into. Available for both large and standard bushings.
-
Comments