1-888-648-2150
Contact Us
Order a free catalog.
Sign up to our newsletter. Many of the parts in the "handy parts" section are available for 10% off when you buy ten of the same part. The discount will show up in your cart.

Online Store

Catalog Products

  • Views:
Pages:
    • original

      Exhaust Grommet

      from $1.50

      Grommet made from high-temp urethane for insulating the exhaust pipes from the frame. Use with Welder Series' exhaust hangers. Now available: Super hi-temp blue grommets.

    • original

      Exhaust Hangers

      from $5.00

      Brackets for mounting your exhaust, in one and two hole configurations, made from mild steel and stainless.

    • original

      Gusset with 3 holes, 90 degree

      from $4.00

      10 ga. steel, available 3"x3" and 5"x5".

    • original

      Urethane Bushing Kits

      from $9.30

      Includes two bushing halves and one inner sleeve.

    • original

      Reinforcing Plate (fishplate)

      from $2.75

      2-1/2" x 5", used to reinforce a butt-welded joint. 10 ga mild steel. Available with or without a hole in the middle.

    • original

      Frame Curves

      from $39.00

      A unique and inexpensive alternative to thin-wall mandrel bent frame sections. Available for 2x3, 2x4, 2x5, 2x6 and 3x3 tubing.

    • original

      Urethane Bushing Outer Sleeve

      from $3.15

      This is the tube that the urethane bushing kits fit into. Available for both large and standard bushings.

    • original

      Frame Bracket - "VersaTab"

      from $3.00

      Use this plate as a motor mount frame plate, a hiboy shock mount, a bracket off of a round tube, or in lots of other places. This is a very versatile plate.

    • original

      Axle Tab, Upper

      $3.25

      Upper axle tab for triangulated four link kits.

    • original

      Frame Bracket, 3-1/2" x 3-1/4"

      from $4.30

      3-1/2" x 3-1/4" with one 1/2" dia hole, 2-5/8" from opposite edge. Buy 10, get 10% off.

    • original

      Sway Bar Kit, Universal

      from $250.00

      This universal fit sway bar is easy to install and lets you fit the bar to just about any application. 36" or 46" long, trim-to-fit.

    • original

      Tucci Tab

      $2.50

      1-7/8" across the base, 1-1/4" high with a 1/8" pilot hole. Handy to have in the shop. 10 ga steel.

    • original

      Mustang II Crossmember, for coil-overs

      from $200.00

      Mustang II crossmember kit, for conventional coil-overs. Ships for 10% of the price. Available as a welded crossmember or a ready-to-weld kit.

    • original

      Frame Tab, #18201

      $2.85

      The center of the 1/2" hole is 1-1/8" from the opposite edge. 10 ga steel. #18201

    • original

      Axle Tab #227031

      $3.00

      1-1/4" high x 1-1/2" wide with a 3/8" hole. This tab fits a 3" rear axle tube.

    • original

      Bolt Kit for Rear Coil-Overs

      from $16.26

      Spacers are 1-3/8" long to space the coil-over away from the rear axle. The washers on the back side keep the coil-over from slipping over the bolt head.

    • original

      Unholes

      $5.00

      Great to use for filling holes in firewalls, frame rails, the ends of tubing, or anywhere there is a hole that needs to be "unholed". In diameters from 3/8" to 1-7/8". PKG of 10.

    • original

      Steel Tubing - Make Your Own Bars

      from $11.00

      Available in 1 foot increments, 4 feet maximum length per tube.

Pages: