...on the tires you are running and how you plan to beat on things. We build parts for street rods and feel they are top quality. A parallel rear 4-link...
Search for rear 4-link - 103 results found
Dear Welder Series… 1989 Chevy Pro Street Pickup Four Link?
...what 4 link set up would you recommend for me? Dear Jon… Our pro/street rear 4-link can be set up so the bars are parallel for street driving or they...
Ford 8.8 Upper Four Link Bars
...8.8 and GM rear ends with the ears on the pinion is now available! 8.8 four link 8.8 four link 8.8 four link 8.8 four link Facebook Email Pinterest Print...
Dear Welder Series… leaf springs vs. four link
...both systems: Rear leaf springs Bolt-in installation. (You will have to weld spring pads onto your axle.) Price. Coil-overs/triangulated rear 4-link Easy to change spring rates to fine tune the...
Dear Welder Series… parallel vs. triangulated four link
...4 link system, which one of yours will work easiest and best? Thank you! Dear Don… Don, the decision regarding a parallel or a triangulated rear 4-link (both shown below)...
Parallel Rear Four Link Package, for Air Springs
We’ve put together a rear suspension package which includes our big bushing parallel 4 link kit, universal Panhard kit, lower air spring axle brackets, upper air spring brackets, and universal...
Triangulated Rear Four Link Package, for Air Springs
GM has used a triangulated rear 4 link in many of their cars for decades. The design eliminates the Panhard bar. To accommodate many frame widths, the formed upper frame...
Parallel Rear Four Link Kit
...will be about 3″ above the bottom of the rail. Rear axle brackets have 3 mounting holes for the coil-overs. Bars are about 25” c-c. (4 bars are included in...
Model A Rear Four Link Frame Bracket
2 holes, 5/8″ diameter, on 5-1/2″ centers. Available for frames with a stock rear taper, or for aftermarket frames which do not have a tapered rear section (when viewed from...
Triangulated Rear Four Link Kit
GM has used a triangulated rear 4 link in many of their cars for decades. The design eliminates the Panhard bar. To accommodate many frame widths, the formed upper frame...
Triangulated Four Link Kit for 8.8 or GM
If you plan to use a Ford 8.8 rear end or a GM rear end with the upper bar ears on the center section, we have a kit with brackets...
Dear Welder Series… Triangulated four link upper bar angle?
Harry Bedarf Hi Paul , if I were to shorten the length of the lower bars of your triangulated 4-link , what must I do for the upper triangulated bars...
Model A Triangulated Rear Four Link Kit
This Model A specific triangulated rear four link kit is available welded or ready to weld. Bushing outer tubes are welded at a 5 degree angle to the bar to...
Frame Bracket, Model A rear four link
Use on Model A frames made from rectangular tubing with no taper when viewed from the side. Use with #10767 spacers. Designed for 1-5/8″ diameter urethane bushings. The upper and...
IFS: Make Your Own
...and More video on that page shows how to install it. Our rear 4-link kit is at https://welderseries.ecwid.com/Model-A-Triangulated-Rear-Four-Link-Kit-p122517030. The installation sheets show where to weld the frame and axle brackets....