Dear Welder Series…
Hello, do you have an IFS for a 57 Ford Wagon?
Dear Writer…
The shop next door is installing our 58″ Mustang II kit in a 57 Ford car. It is necessary to fabricate a front frame section from the firewall forward. We are taking pics of the installation and will have them on our site soon. Thanks for considering Welder Series’ parts, Chris. UPDATE: Here is a link to the front end install: http://www.welderseries.com/blog/how-to-articles/mustang-ii-installation-1957-ford/
Paul Horton
Dear Welder Series…
I am interested in using your triangulated 4 link for my truck. Do you have a Air shock option for your kit….Ross
Dear Ross…
Ross, you could use our standard rear kit with lower air bag brackets #21870. Upper mounts could be #474208. The lower “coil-over” mount on the axle bracket could be used for the shock mount.
Thanks for looking at Welder Series’ parts.
Paul Horton
Dear Welder Series…
Yes, me again,
I have a stripped ford 8.8 rear end and need to put some shock mounts on the axle. Do you guy make anything that would fit the bill? I looked through your product offerings but didn’t notice any items.
PS…. brake lines going in next week.
Thanks,
Stephen
Dear Stephen…
Hi, Stephen.
Check out #223501.
Thanks for asking.
Paul Horton
Dear Welder Series…
Hey, I was looking for a pair of 2″ spring pivot/hangers.
Most that are out there are for front suspension use, and kinda wimpy.
What would a pair of these cost, welded, or not welded?
no bushings, but I do need 2 pair of jam nuts
thanks,
Ben
Dear Ben…
Thanks for asking about our parts, Ben.
Two hangers for 2″ shackles, welded, with 2 pair of jam nuts, would cost $58.00 plus shipping ($15.00). These would be made for 3/4″ o.d. shackle bushings. Lead time would be about 3 days out of our shop.
I hope we can help with this part of your project.
Paul Horton
Comments