Dear Welder Series… brake pedal/clutch for Model A?

Dear Welder Series…
Hey there,
I’m looking to order a pedal assembly but I’m having a hard time finding what I need.  I’m looking for a ready to weld brake pedal/master cylinder kit that includes the clutch pedal that works with a Model A frame.  I remember seeing it on your site some time ago but now I can’t find it.  If you can send me a link or give me some information it would be much appreciated!  Also a price & shipping to Sask would be great.

Thanks guys,

Dear Nathan…
There are a couple of ways to do this with Welder Series kits, Nathan. Because the frame is narrow, it’s not easy to have room for the pedals, exhaust, and transmission (and linkage), so we use the kits that move the master a little farther from the frame rail than the Model ‘A’ kit.  Look at the options menu and the pictures. One is at!/Brake-Pedal-Master-Cylinder-Bracket-32-Ford/p/50683993/category=13194938.

Another way is by moving the master cylinder back from the pedals. Again, see the options and the pictures.!/Booster-Bracket-&-Pedal-Mount-Under-Seat-Mount/p/50666963/category=13194938. Lowdown Hotrods mounted the bracket behind a Welder Series transmission mount crossmember, as shown in the thumbnail picture at!/Formed-Brake-Booster-Bracket-Long/p/50737639/category=13235808

Pricing is at each product in the store when you choose from the options menu. Freight is at Oops! Nothing there about Canadian shipments.  (We’ll get this looked after.) The method is the same as for the US: 10% of the order, minimum $15, maximum $60. We use UPS or Canada Post for Canadian shipments.

Thanks for looking at Welder Series parts.

Paul Horton

Dear Welder Series…
Thanks for the speedy reply on this!

I think the first link in your reply would be best suited for my needs. It says it’s for a 32 but I think I could make that work. Question though, how does a guy typically mount it to the frame rail? Is it just meant to be butt welded on? Just having trouble visualizing this. Maybe if you had a couple pictures that would help.

Dear Nathan…
The bracket would weld to a boxed section of frame rail.  It would be best to have the body on the frame so you can determine where the pedal will come through the angled toe-board.  If your firewall goes right down to the frame, a slot in the floor might be better.  We can substitute a straight pedal in this case.!/Pedal-Straight/p/50755047/category=13235808

Sorry, I don’t seem to have an installed picture.


Leave a Reply