Dear Welder Series… stock ’32 Ford brake pedal bracket?

Dear Welder Series…
Dear Sir,
Can you tell me if I could bolt or weld on the brake/master cylinder bracket to the original unboxed 1932 ford chassis or explain me how to do without boxing the chassis ?
regards,
Filip

Dear Filip…
If you plan to leave the stock K-member in the frame and use a flathead, it might be best to leave the stock pedal in place and use a pushrod back to our master cylinder mount.

Our weld-on bracket can be bolted to an unboxed frame by making a channel to fit inside the frame rails.  The channel can be made by welding 3 pieces of plate together.  Drill 2 holes in the top and bottom legs of the frame rails and countersink the frame to use flat head Allen bolts.  Weld the master cylinder mount to the channel.

Thanks for looking at Welder Series parts.

Paul Horton

Leave a Reply