Dear Welder Series… Triangulated Four Link Mounting

Dear Welder Series…
Thank you for the great help and parts. I have a request if possible, looking for a mounting bracket that would work for my upper 4 link bars that I bought from you it is the triangulated 4 link. I’m wanting to mount them to the top of a Chevy 10bolt rear end as you know the rear diff housing is cast. Any ideas or help would be great thanks

Dear Brian…
Brian, the upper bars can be mounted on the axle tubes just inside the frame rails.  Angle the bars towards the middle of the frame and put a crossmember between the rails to hold the front brackets.  All of the brackets in the kit can be used.

I hope this helps.

Paul Horton

Leave a Reply